- Full power at low spindle speed
- Large diameter precision ball screws and nut assemblies on X and Z axis-with metal covers
- T-slotted compound for easy mounting of optional tool posts
- May be used as a conventional (manual ) lathe utilizing dual handwheels or as a full feature two axis CNC
- Centralized automatic slideway lubrication system
- Coolant system
- Easy chip removal through a front access chip pan on wheels
- Full sheet metal enclosure to keep coolant and chips off the floor
- 15" is the swing over the bed
- Distance between centers is 39.3" or 59"
- Spindle speed - 50~4,500 rpm
- 10 HP main spindle motor
| FEATURE | FB-15 |
| Swing Over Bed | 15" |
| Swing Over Cross Slide | 6.7" |
| Distance Between Centers | 39.3" / 59" |
| Width of Bed | 12" |
| Spindle Nose, Internal Taper | A2-6 |
| Spindle Bore | 2.125" |
| Spindle Speed: Gear Steps/Range | 50~4500 RPM |
| Longitudinal Travel (Z-axis) | 29.5" / 49.2" |
| Cross Slide Travel (X-axis) | 7" |
| AC Servomotor (X-axis) | 48 in-lbs. / 0.9kW |
| AC Servomotor (Z-axis) | 48 in-lbs. / 0.9kW |
| Dia. of Ball Screw (X-axis) | Ø1" P5 |
| Dia. of Ball Screw (Z-axis) | Ø1.5" P10 |
| Rapid Traverse Speed (X-axis) | 195 IPM (5 M/min) |
| Rapid Traverse Speed (Z-axis) | 393 IPM (10 M/min) |
| Boring Bar Diameter | Ø0.787" |
| Quill Diameter | Ø2.125" |
| Quill Travel | 5.1" |
| Taper of Center | MT.No.4 |
| Main Spindle | 10 HP (7.5kW) |
| Hydraulic Oil Pump | OPT. 2 HP (1.5 kW) |
| Forced Lubrication for Headstock | 1/4 HP (190 W) |
| Coolant Pump | 1/8 HP (95 W) |
| Hydraulic Tank | OPT. 5.3 gallons (20 liters) |
| Coolant Tank | 23.5 gallons (89 liters) |
| Weight (Net) Approx. | 4,410 lbs / 4,850 lbs |
| Weight (Gross) Approx. | 4,850 lbs / 5,400 lbs |
| Machine Dimensions (LengthxDepthxHeight) |
Length 90"/110" x Depth 53" x Height 87.8" |
- Actual working stroke may be reduced by work holding equipment and chuck guards.
- Specifications are subject to change without prior notice.